Spec
Dimensions
Unit: mm <ft-in>
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| V4-7 | 3730 <12'3”> |
3005 <9'10”> |
2420 <7'11”> |
790 <2'7”> |
4425 <14'6”> |
4450 <14'7”> |
1655 <5'5”> |
1880 <6'2”> |
890 <2'11”> |
370 <1'3”> |
295 <0'12”> |
2555 <8'5”> |
2115 <6'11”> |
1240 <4'1”> |
1690 <5'7”> |
1645 <5'5”> |
2545 <8'4”> |
3200 <10'6”> |
3805 <12'6”> |
Specifications
| Model | V4-7 | ||||
|---|---|---|---|---|---|
| Type | CANOPY | CABIN | |||
| Engine | Type | Water-cooled 4-cyl. diesel engine | |||
| Model | 4TNV88C-NKAH | ||||
| Output (Gross) | kW <hp>/ min-1 | 30.5 <40.9> / 2500 | |||
| Output (NET) | kW <hp>/ min-1 | 29.1 <39.0> / 2500 | |||
| Displacement | cm3 <cu. in3> | 2189 <133.6> | |||
| Performance | Bucket capacity, std | m3 <yd3> | 0.5 <0.65> | ||
| Operating load | kN <lb> | 11.3 <2535> | |||
| Lifting capacity | at Low end / at MAX reach |
kN <lb> | 33.1 <7441> / 23.8 <5350> | ||
| Tipping load | Straight / Full turn | kN <lb> | 27.0 <6070> / 22.5 <5058> | ||
| Breakout force | kN <lb> | 24.5 <5508> | |||
| Dumping clearance | mm <ft-in> | 2420 <7'11"> | |||
| Traveling speed | km / h <mph> | 19.0 <11.8> | |||
| Oscillation angle | degrees | ±8 | |||
| Min.tuning radius | mm <ft-in> | 3805 <12'6"> | |||
| Min.ground clearance | mm <ft-in> | 295 <12"> | |||
| Electoronic | Battery capacity (5 hours rate capacity) | Ah | 72 | ||
| Generator capacity | V / A | 12 / 80 | |||
| P.T.O. | Front Hyd.PTO | Maximum flow | L <US gal> / min | 56 <14.8> | |
| Set pressure | kPa <PSI> | 20590 <3000> | |||
| Steering | Type | Center-pivot frame articulation with full hyd.power | |||
| Articulate angle | degree | 40.5 | |||
| Transmission | Type | Automatic hydrostatic | |||
| Drives | Type | 4-wheel drive | |||
| Wheels | Type | 15.5/60-18-8PR | |||
| Brakes | Type | Fully enclosed,mechanical,wet,multiple disc | |||
| Operating Weight | kg <lb> | 3640 <8025> | 3865 <8521> | ||
| Transport Dimensions | L×W×H | mm <ft-in> | 4425×1690×2555 <14'6"×5'7"×8'5"> | 4425×1690×2545 <14'6"×5'7"×8'4"> | |
| Filling Capacity | Fuel tank capacity | L <US gal> | 55 <14.5> | ||
| Engine oil | L <US gal> | 7.4 <1.95> | |||
| Hydraulic oil tank | L <US gal> | 52 <13.7> | |||
| Coolant | L <US gal> | 4.7 <1.2> | |||
| Front axle / Rear axle | L <US gal> | 7.5 <2.0> / 9.5 <2.5> | |||
Please note that the standard equipment may vary from this list. Consult your Yanmar dealer for confirmation