Spec
Lifting Capacity
With:
Canopy Type
Rubber Crawler
Without : Bucket
Track gauge : Maximum
A: Reach from swing center line [m<in.>]
B: Load point height [m<in.>]
C: Lifting load [kg<lbs.>]
P: Load point
: Rating over front
: Rating over side or 180 degrees
Blade on ground
Unit : kg <lbs.>
A [m. <in>] | Max. | 2.0 <78.7> | 1.5 <59.1> | Min. | ||||
---|---|---|---|---|---|---|---|---|
B [m. <in>] | ||||||||
2.0 <78.7> | 220 <*485> |
- | - | - | - | - | - | - |
1.5 <59.1> | 220 <*485> |
- | 220 <*485> |
- | 270 <*595> |
- | - | - |
1.0 <39.4> | 230 <*507> |
- | 260 <*573> |
- | 350 <*772> |
- | 490 <*1080> |
- |
0.5 <19.7> | 240 <*529> |
- | 300 <*662> |
- | 470 <*1036> |
- | 590 <*1301> |
- |
0 <0> | 240 <*529> |
- | 320 <*706> |
- | 480 <*1058> |
- | 630 <*1389> |
- |
-0.5 <-19.7> | 260 <*573> |
- | 280 <617> |
- | 430 <*948> |
- | - | - |
-1.0 <-39.4> | 230 <*507> |
- | - | - | - | - | - | - |
Blade above ground
Unit : kg <lbs.>
A [m. <in>] | Max. | 2.0 <78.7> | 1.5 <59.1> | Min. | ||||
---|---|---|---|---|---|---|---|---|
B [m. <in>] | ||||||||
2.0 <78.7> | 190 <419> |
160 <353> |
- | - | - | - | - | - |
1.5 <59.1> | 150 <331> |
120 <265> |
170 <375> |
150 <331> |
240 <*529> |
200 <441> |
- | - |
1.0 <39.4> | 130 <287> |
110 <243> |
170 <375> |
140 <309> |
280 <617> |
230 <507> |
380 <838> |
300 <662> |
0.5 <19.7> | 130 <287> |
100 <221> |
170 <375> |
130 <287> |
260 <573> |
210 <463> |
320 <706> |
260 <573> |
0 <0> | 140 <309> |
110 <243> |
170 <375> |
130 <287> |
260 <573> |
210 <463> |
340 <750> |
270 <595> |
-0.5 <-19.7> | 170 <375> |
130 <287> |
160 <353> |
130 <287> |
270 <595> |
210 <463> |
- | - |
-1.0 <-39.4> | 230 <*507> |
210 <*463> |
- | - | - | - | - | - |
Note :
The lifting load with the asterisk <*> mark is limited by hydraulic lifting capacity rather than tipping. The lifting capacity shown in the above list is based on the ISO Standard No. 10567 and represents either 87 % of hydraulic lifting capacity or 75 % of tipping load, which is smaller.
Dimensions
Unit: mm <ft-in>
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SV08-1C | 1500 <4'11"> |
1620 <5'4"> |
1260 <4'2"> |
2730 <8'11"> |
2600 <8'6"> |
1220 <4'> |
2750 <9'> |
1950 <6'5"> |
1180 <3'10"> |
2200 <7'3"> |
180 <7"> |
680-840 <2'3"-2'9"> |
180 <7"> |
130 <5"> |
230-310 <9"-1'> |
540 <1'9"> |
330 <1'1"> |
140-220 <6"-9"> |
725 <2'5"> |
Specifications
Model | SV08-1C | ||
---|---|---|---|
Type | Variable track gauge type | ||
Operating Weight | Operating mass | kg <lbs> | 1035 <2282> |
Machine mass (without implement) | kg <lbs> | 675 <1488> | |
Engine | Type | - | Vertical two cylinder water-cooled diesel engine |
Model | - | 402J-05 IG84557R | |
Rated Output | kW <hp>/ rpm | 7.7 <10.3> / 2400 | |
Performance | Bucket capacity, standard (ISO heaped) | cu.m <cu.ft> | 0.022 <0.777> |
Max Digging Force | kN <lbf> | 10.5 <2360> | |
Traveling Speed | km / h <MPH> | 1.8 <1.2> | |
Swing Speed | rpm | 8.0 | |
Boom Swing Angle, [L / R] | degrees | 45° / 90° | |
Ground Contact Pressure | Average ground pressure, standard crawler | kPa <PSI> | 28.8 <4.18> |
Hydraulic System | Pump Capacity | L / min <GPM> | 9.8 <2.59>×2 (Gear pump) |
Main Relief Set Pressure | MPa <PSI> | 18.1 <2625>×2 | |
Undercarriage | Track Type | - | Rubber |
Blade Dimensions | Width x Height | mm <ft-in> | 680 / 840 × 180 <2'3" / 2'9" × 7"> |
Fuel tank capacity | L <Gals> | 9.7 <2.6> |
Hydraulic P.T.O.
Model | SV08-1C | |
---|---|---|
Output | MPa <PSI> | L / min <GPM> |
2400RPM | ||
Specification Combined Flow, Double Actions |
18.1 <2625> | 19.6 <5.2> |